Announcement

Collapse
No announcement yet.

D.I.Y.ตอน ต่อแอมป์ 40+40 w. ราคาไม่ถึงพัน

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ได้ฤกษ์ดัดแปลงแอมป์อีกรอบ เจอจุดอ่อนจากวงจรบริดจ์ LM1875 นั่นคือ
    1.เสียงฮัมเยอะ ลงกราวนด์แล้วก็ยังไม่หาย
    2.แค่เปิดเฉยๆ ยังร้อนมาก เปลี่ยนซิงค์แล้วก็ยังเหมือนเดิม
    3.เร่งหนักๆ มีตัด-เสียงหายเป็นพักๆ เป็นจังหวะๆ น่าจะมาจากระบบป้องกันความร้อนสูง+กระแสเกินมันตัด

    ได้วงจรที่เอาทรานซิสเตอร์มาต่อพ่วงขับกระแสแทนไอซี ตามนี้เลย

    โดยรวมก็เหมือนกับวงจร TDA2030 ที่เป็นวงจร OTL30W ในดาต้าชีท เพียงแต่ R10 กับ L1 ไม่มีการใส่ไว้ในวงจรที่ทำ

    เมื่อวานซื้ออะไหล่มาก็มี C5200+A1493-2คู่ R1Ohm/3W-4ตัว R0.22Ohm/5W-4ตัว ปริ๊นท์อีป๊อกซี่ที่ยังไม่ได้กัด รวมจ่ายไป250บาท
    รูปตอนทำไม่ได้ถ่ายไว้เลย อุปกรณ์ที่ว่ามาบัดกรีลงปริ๊นท์นี้ทั้งหมด ลายวงจรง่ายๆ เลยใช้วิธีเอาคัตเตอร์กรีดลายให้ขาดจากกันแทน ส่วนวงจรหลักก็อาศัยถอดอุปกรณ์ส่วนเกินออกเท่านั้นเอง

    รูปถ่ายตอนที่กำลังรันอินอยู่มุมกล้องเลยจำกัด



    เรื่องเสียงนั้นยังไม่ต่างจากเก่าเท่าไหร่ อานิสงศ์ทรานซิสเตอร์โตชิบ้ามั้ง แค่กำลังขับตกลงหน่อยนึงแต่เย็นลงเยอะเลย เสียงฮัมแทบไม่มีถ้าไม่เอาหูเข้าไปในระยะ5เซ็นต์

    Comment


    • หมายถึง npe clone น่ะหรอครับ ผมไม่เคยวัดซักที เอาไฟล์ PDF ไปให้ร้านกัดปริ้นง่ายกว่านะ แต่ถ้าไม่สะดวกไฟล์ pdf
      มันไม่มีการย่อขนาดอยู่แล้ว บอกเค้าปริ้นออกมา 1:1 เลยครับ แต่ถ้าเอาให้ชัวก็ปริ้นออกมาแล้ววัดขนาดของขาไอซี
      แล้วเปิด data sheet ดู(lm3875tf) ซึ่งในนั้นจะบอกขนาดของขาไอซี
      Originally posted by RAVEN_02 View Post
      อีกนิดครับลายปริ้นในไฟล์ PDF ที่ท่านจขกทอัพไว้

      นี้ขนาดเท่าไรครับผมจะให้ที่ร้านตัดสติกเกอร์แล้วจะมากัดลายเอง

      รบกวนด้วยครับ
      Last edited by fenderfree; 12 Aug 2011, 19:50:06.

      Comment


      • PCB ไข่ปลา เขียวๆ แบบนั้น ลองดู ES มีแน่นอน

        ตู้กระจกริมซ้ายในสุด

        Comment


        • Originally posted by fenderfree View Post
          หมายถึง npe clone น่ะหรอครับ ผมไม่เคยวัดซักที เอาไฟล์ PDF ไปให้ร้านกัดปริ้นง่ายกว่านะ แต่ถ้าไม่สะดวกไฟล์ pdf
          มันไม่มีการย่อขนาดอยู่แล้ว บอกเค้าปริ้นออกมา 1:1 เลยครับ แต่ถ้าเอาให้ชัวก็ปริ้นออกมาแล้ววัดขนาดของขาไอซี
          แล้วเปิด data sheet ดู(lm3875tf) ซึ่งในนั้นจะบอกขนาดของขาไอซี
          เก็ทเลยครับขอบคุณมากนะครับ ผมว่าจะทำเล่นซักอันช่วยให้คำแนะนำด้วยนะ ^_^

          Comment


          • Mr. Sijosae นี่เขาได้ชื่อว่าเป็น Miniature Guru อยู่แล้ว ออกแบบ/ทำอะไรเล็กได้ใจ
            อันนี้ก็ประหยัดวงจรไปได้หลาย แถมใช้ไฟได้คุ้มค่า ใครทำตาม เอา Energy star ไปแปะได้ 1 ดวง 555+
            ตัว 317นี่มันก็ค่อนข้างคุมไฟได้นิ่งพอควร ปัญหาไฟกระเพื่อมนี่น่าจะน้อย จนไม่น่าทำให้เสียคุณภาพไปมากนัก
            แต่... ยังไงซะถ้าเอาจริงจังกับคุณภาพ แยกได้ย่อมดีกว่า

            พูดถึงปริ้นท์อเนกประสงค์ ผมกลับชอบฟินอลิก ธรรมดามากกว่าพวก อีป๊อกซี่นะ
            มันตัดง่ายดี เวลาเอามาทำนู่นนิดนี่หน่อย เล็กๆน้อยๆ ก็คัตเตอร์กรีดบน กรีดล่าง
            ทาบกับขอบโต๊ะ แล้วก็หักป๊อก ได้ละ
            พวก epoxy นี่มันเหนียวว... จะตัดทีต้องไปค้นเอาเครื่องตัดมาตัด หรือไม่ก็ต้องเลื่อยเอา

            ------
            อ้อ... เห็นรูปแอมป์หูฟังที่คุณkeang เอามาให้ดู แล้วนึกได้ ว่าจะถามอยู่
            ไอ้เจ้า Auricap นี่ เมืองไทยหาที่ไหน ที่ราคาไม่ขูดเนื้อมั่งอ่ะ?
            ชอบที่มันให้รายละเอียดเสียงได้ดีมาก แถมตัวเล็กดีด้วย ที่เคยมีก็ใช้ไปหมดเสียแล่ว

            Comment


            • Originally posted by dracoV View Post
              ไอ้เจ้า Auricap นี่ เมืองไทยหาที่ไหน ที่ราคาไม่ขูดเนื้อมั่งอ่ะ?
              ชอบที่มันให้รายละเอียดเสียงได้ดีมาก แถมตัวเล็กดีด้วย ที่เคยมีก็ใช้ไปหมดเสียแล่ว
              Auricap ราคานี้ แรงไหมครับ?

              ....เห็น web นึงในเมืองไทย ...ขายอยู่

              กะ...จะลองหามาใช้ดู...อยู่เหมือนกัน....


              0.22uF/600V 820 Baht.

              0.22uF 600V 10% Auricap $18.00 inc. GST

              0.47uF/600V 950 Baht.

              0.47uF 600V 10% Auricap $23.00 inc. GST

              0.22uF/450V 780 Baht.

              0.33uF/450V 830 Baht.

              0.47uF/450V 880 Baht.
              Last edited by jinn; 13 Aug 2011, 11:12:18.

              Comment


              • เรื่องร้านขายกับเรื่องราคา ผมไม่มีข้อมูลเลยครับ คงต้องเช็คเอาในเนท

                AuriCap สังเกตุที่โค๊ดบนตัวมันดีๆ จะเหมือนกับอีกหลายยี่ห้อ ถ้าเป็นCชนิดเดียวกัน ฐานเสียงจะใกล้เคียงกันมาก
                เสียงจะมีต่างกันบ้างก็ตามสายไฟที่เค้าใช้ทำขาตัวC กับ ความหนา(+โปร่งใส)ของเนื้อพลาสติคสีเหลืองที่ใช้หุ้มตัวC

                ส่วนใหญ่Cที่ทำจากโรงงานนี้จะเด่นเรื่อง ตำแหน่งมิติเวทีเสียง, มีรายละเอียด, มีเนื้อเสียง, มีทุ้มตอนล่างสไตล์อิเลคทรอไลติคส์แต่ไม่ใหญ่เท่า

                ถ้าบ้านเราหาAuriCapลำบาก ลองใช้ข้อมูลข้างบนเป็นตัวช่วย น่าจะช่วยให้หายี่ห้ออื่นที่มีฐานเสียงสไตล์เดียวกันได้ครับ


                พวกเครื่องที่ผมทำใช้เองหรือเครื่องที่ต้องการเน้นมากหน่อย ผมยังใช้ของSiderealKapsอยู่เลยครับ
                ถ้าค่าไหนผมไม่มีแต่เพื่อนมี ก็แอบไปจิ๊กจากสต็อคของเพื่อนมาใช้
                ถ้าไม่มีกันทั้งกลุ่มก็ค่อยเอาMultiCapรุ่นRTXมาใช้ แต่ลำบากตรงที่ขนาดใหญ่กว่ามากต้องหาทำเลดีๆถึงจะใส่แทนได้

                ถ้าพวกเครื่องที่ไม่ได้เน้นอะไรมากหรือทำกับพวกSound CardพวกDAC ผมจะใช้ตัวเหลืองข้างเขียวขาลวด
                ฐานเสียงแบบเดียวกันแต่เสียงไม่ใหญ่เท่า ก็เป็นไปตามชนิดของวัสดุ, ขนาดที่เล็กกว่า, ราคา ละครับ
                แต่ที่ชอบจริงๆคือยังได้เรื่องตำแหน่งมิติเวทีเสียงเหมือนที่ยี่ห้ออื่นจ้างโรงงานผลิต
                Last edited by keang; 13 Aug 2011, 12:01:25.

                Comment


                • เสียดายสั่งของ...เมืองนอกไม่เป็น...

                  ภาษาอังกฤษ....ก็คืน...คุณครูไปหมดแล้ว....

                  ราคา Auricap เมืองนอก คร่าว....คร่าว...

                  Auricap 600V DC

                  http://www.soundlabsgroup.com.au/c/A...p+600V+DC.html

                  ..................................................

                  http://www.soundlabsgroup.com.au/c/C...omponents.html
                  Last edited by jinn; 13 Aug 2011, 11:20:49.

                  Comment


                  • Auricap เท่าที่เคยลองใช้ ความเห็นส่วนตัวนะ
                    เอาที่เด่นๆละกัน
                    - ให้รายละเอียดดีมาก เมื่อทดสอบกับเพลงที่คุ้นเคยรู้จักรายละเอียดเสียงดี เรียกว่าแทบจะเก็บรายละเอียดได้ทุกเม็ด
                    - ตอบสนองความถี่ได้ Flat ดี
                    - ค่อนข้าง Transparent มาก ภาษาปะกิดที่ว่า Coloration (ภาษาไทยไม่รู้ครับ) ที่มักมีใน Cap ต่างๆ Auricap จะค่อนข้างน้อย
                    - ขนาดเล็ก คุณภาพการผลิตสูง

                    ข้อด้อย(หรือเปล่า?)
                    - ตอบสนองความถี่ได้ Flat ทำให้รู้สึกว่ามิติเสียงจะออกแบนๆนิดๆเดียว
                    - มวลเสียงค่อนข้างหนา เนื่องจากรายละเอียดมาก (มังนะ)
                    - ไม่หวาน 555+ หลายคนฟังแล้วอาจรู้สึกอึดอัดนิดๆ
                    - ค่อนข้างแพง

                    เท่าที่พอนึกออก/จำได้น่ะ

                    ตำแหน่งที่ใช้ ผมจะใช้ที่ Input หรือ Inter state มากกว่า เคยใช้ที่ Output แล้วไม่ค่อยชอบ

                    ความเห็นส่วนตัว ว่าไม่ควรใช้ เจ้า Auricap ในทุกส่วนของวงจรพร้อมกันหมด เสียงจะอึดอัดเกิน
                    และอาจรู้สึกว่าเสียงโดยรวมจะออกกระด้างๆ

                    ราคาตลาดใน USA ก็ประมาณนี้น่ะ จากร้านที่เคยซื้อ
                    <<Click me #1>>
                    <<Click me #2>>
                    Last edited by dracoV; 13 Aug 2011, 11:22:14.

                    Comment


                    • ลองสังเกตุโค๊ดที่พิมพ์บนตัวC ... EGA ...
                      - SiderealKapsรุ่นมาตราฐาน ตั้งแต่เริ่มผลิตจนเลิกผลิต จะมีการเปลี่ยนขาCไปใช้สายหลายยี่ห้อ แต่ก็จะกลับมาใช้ขารุ่นมาตราฐานตลอด

                      - Air Tight ATE-2 ใช้ SiderealKaps น่าจะเป็นรุ่นสุดท้าย

                      - AuriCap

                      - KimberKap



                      เครดิต : www.audioasylum.com
                      เค้าพูดคุยกันเรื่องCยี่ห้อ SiderealKaps, KimberKap, auricap
                      Originally posted by Keith Lockwood
                      croft, I am suprised that you find so much difference between the Kimber caps and the AuriCap. They are the same damn cap other than the leads. Do you remember the older SidrealKaps? That was also the very same cap as the AuriCap, but with Kimber teflon coated stranded copper leads instead of the solid leads found on the Auric units. I assume that Kimber and Sidreal are one and the same. I am sure that the leads do sound different.
                      I don't see all the fuss over AuriCaps myself. They are good. Perhaps a bit better than a Solen, but nothing to get all worked up over. The AuricCap subtracts harmonic richness and ambient decay info from the signal. They sound a bit dry. They just don't let the signal pass unaltered as well as some other caps I have tried. I don't know anything about the Sonic Cap. I haven't listened to them.
                      Originally posted by McAttack
                      Keith,

                      I was in on the design of the SiderealKap and the Auricap. I can most assuredly promise that Auricap and KimberKap are not the same. To assert that the only difference is the leads, is a huge and erroneous assumption.

                      John
                      Audience

                      john@audience-av.com
                      Originally posted by Keith Lockwood
                      John, I am always happy to admidt when I am wrong. I got that information from someone in the business of selling caps. Sorry to be spreading disinformation. It is my understanding that many of the high quality cap brands available today are manufactured by one company in Califorina, so it didn't seem all that unusual to me for this to be the case. I had used the SiderealKap as my cap of choice back in the eighties. SiderealKap, as you know, had leads that appeared to be Kimber teflon coated stranded copper. At some point the SiderealKap seemed to disapear from the the U.S.market and it was a short time after that I started seeing the KimberKap being sold. I suspected at the time that it was a re-branded SiderealKap as the apperance was so similar and seemed to both use Kimber leads. As I said, I was told that the KimberKap, AuricCap and the SiderealKap were one and the same by someone in the business. Is my information also incorrect that the AuricCap and the SidrealKap are identical save for the lead material? I am not trying to get at anything negative about the AuricCap by asking this. As I said, I was a fan of the SiderealKap when it was more available a number of years ago. I still have 3, .01uF SiderealKaps in my parts box. If not, e-mail me directly and I can help you clear this confusion up with one of your vendors, who has this clearly stated on their web site.

                      Keith
                      Originally posted by McAttack
                      Keith,

                      No worries on your intentions. The fact is that you have been misinformed. However you do have some of the pieces correct. Here'z the scoop. Sidereal Akustic Audio Systems, Inc. in the early 80s developed SidrealKaps which incorporated Kimber's wire for the leads. When SAAS went down, Ray Kimber picked up the ball as best he could and continued making a "simular" cap made by the same manufacturer. Simular, but not quite the same per the non disclosure agreement SAAS had with the manufacturer. In '98 Audience was formed by the same principles that started SAAS, Richard Smith and myself. Audience developed Auricaps incorporating what we had learned with SiderealKaps and several new design techniques. Therefore, all three brands are different, as noted by the distinct difference in performance of each. I hope this helps clear the misinformation. Again, no offense taken. I appreciate the opportunity to clear the air.

                      VBR,
                      John McDonald
                      Originally posted by croft
                      Hi Keith,
                      Thanks for the post,
                      Wow,Interesting keith.
                      I have listened to the Auricaps for about 4 months and find them very good.
                      Having compared them to the kimbers i do think they are better,
                      Wether the SP6 itself betters the SP9 is another factor which i should have mentioned.

                      The SP9 i had was real bad with the Kimbers.
                      The six has a beautiful sound.

                      What kaps do you use keith?
                      I find the Auricaps subtract very little but am always open to experimentation.
                      Here in the Uk Kimber are very well known for hi fi tweeks but not for kaps.
                      The Auricap give phenominal spech readouts on the net compared to Multicap and Rel.

                      Thanks,
                      Ian.
                      Originally posted by Keith Lockwood
                      Ian,
                      I am well aware that the AuricCap is very popular here at AA. I was using the SiderealKaps that I mentioned back in the mid eighties. They were a good cap at the time. It amused me when all the buzz was starting about the AuricCap to learn that it was the same cap with different leads that I was using almost 20 years ago.

                      Let me say that I am also well aware that taste is an issue with all of this stuff. My feelings are that it can be difficult to isolate what a cap really sounds like on it's own, when replaceing them in a circuit like you mentioned in your ARC units. I am a huge ARC fan myself having owned several of their pre amps and use one now in my own system. I worked at an ARC dealer when the 6 was being produced and feel like I have a good idea of it's sound.

                      Anyway, what I have been doing for some time is experimenting with some different caps in a way that has proven to be eye opening. I use a Vandersteen 2Wq sub. The sub requires that a high pass filter be placed at the amps input. The filter is nothing more than a calculated cap value. I have found that this is a great way to evaluate the sound of caps without outside influences. You introduce a cap into a place where there was none before and you really can detect is signature. This all started when I began to question the claim of transparency of the Vandersteen X-2 fixed in line filters. When they were in the system, it seemsed to rob it of some of it's magic, although I gained the added foundation and weight that the woofer is capable of. It just seemed to loose the clarity it had before. I started by trying a set of filters that a friend sent me made with a single InfiniCap. The Vandersteen units use a very cheap yellow REL cap. The difference was huge.Much closer to the sound of no filter at all but with the bass. I next built a filter using the Dynamicap. This time the difference was more subtle, but the DynamiCap was clearly better. The DynamiCap was more realistic in that it had even a bit better clarity and it's harmonic richness was superior, as close as I have been able to come to no caps(no filter) at all. I then built an AuriCap filter and compared it to the InfiniCap and the DynamiCap units. Granted it was good sounding in many ways. Much Much better that the Vandersteen REL cap X-2's but it couldnt match the InfiniCap filter. It seemed to subtract ambient and overtone information which left me with a somewhat dry sound. The harmonic richness just wasn't there, which flattened the presentation.
                      It sounded nice, like I said in many ways, I just felt very strongly that the InfiniCap was more lifelike. The DynamiCap is better yet. I will at some point try some of the new Cardas caps, which are well liked by Steve Huntley at Great Northern Sound.

                      I think this is a unique spot in the system to hear what a cap does or doesn't do to the signal that passes through it. Right now the DynamiCap is the very best I have tried. I have plans to use them in my amp and pre amp to replace the InfiniCaps that are there now.

                      By the way, I am using an SP 9 with InfiniCaps installed. My 9 also has an IEC inlet. Getting rid of the 18.Ga stock cord is huge. The amp is an ARC VT 50, which comes from the factory with InfiniCaps.

                      Keith

                      Hovland MusicCap รุ่นไฟต่ำ สำหรับใช้ในวงจรCrossover Networkของลำโพง
                      เท่าที่เคยแกะCเล่น+สำรวจด้วยตาเปล่า ถ้าไม่สนใจเรื่องขาที่ต่างกัน จะมีHovlandที่เฉดสีและความหนาของเนื้อพลาสติคหุ้มเหมือนของSiderealKapsรุ่นแรกๆที่สุด
                      ( รุ่นแรกๆจะสีเหลืองอ่อน รุ่นหลังๆสีจะเข้มขึ้น ในปีผลิตเดียวกันบางครั้งก็มีเฉดสีเข้มไม่เท่ากัน )



                      ---------------------------------------------


                      สั่งของจากร้านพวกนี้ ส่วนใหญ่เค้าจะส่งทางFedEx, DHL ค่าส่งจะสูงพอสมควร$30-40
                      ถ้าสั่งน้อยสั่งไม่กี่ตัว บางทีค่าส่งสูงกว่าค่าของอีก

                      ส่วนใหญ่จะใช้วิธีรวมๆกันสั่ง แล้วแชร์ค่าส่งกัน ประหยัดไปได้พอสมควร
                      Last edited by keang; 13 Aug 2011, 13:23:20.

                      Comment


                      • ใช้แล้วครับ ไอ้ร้านพวกนี้ มันคิดค่าส่งโหด
                        อย่าง Digikey เนี่ยก็ $40 flat rate เลย

                        ผมถึงอยากหาร้านในไทย ไว้ไปคอยส่องๆ

                        Comment


                        • สีสวยดี...

                          ว่าจะลองทำดู...ด้วย....ไว้ เป็น โปรเจด ต่อไป...



                          ลองคิดเล่น...เล่น...

                          0.22uF 600V 10% Auricap $18.00 inc. GST ค่าตัว 540 b. / ต่อ

                          ค่าส่งของประมาณเท่าไรครับ ลองกะคร่าว...ให้หน่อยครับ../ มีค่าภาษีอีกด้วยหรือป่าว...

                          .................................

                          เด๋ว...วันนี้จะไปเดินทัวร์....บ้านหม้อ...

                          เด๋วลองไปสืบ...ดู.... ว่ามีที่ไหนมีแหล่ง...ได้ล่ะแจ๋วเลย..

                          มีอีกหลายตัวที่อยากได้อยู่...
                          Last edited by jinn; 13 Aug 2011, 11:53:22.

                          Comment


                          • ^^ ค่าส่งอันนั้น ผมก็ไม่แน่ใจน่ะครับ ลองไปใช้ตระกร้าซื้อของ ของเขาดูคิดว่าขั้นตอนท้ายๆก่อนส่ง order
                            น่าจะมีคิดราคารวมส่งให้นะ (ไม่ชัวร์นะ) ส่วนภาษี ถ้าโชคดีก็ไม่โดนครับ

                            ไปเดินบ้านหม้อ เจออะไรดีๆ ราคาน่าสน กระซิบบอกด้วยนะครับ

                            Comment


                            • Originally posted by dracoV View Post

                              ไปเดินบ้านหม้อ เจออะไรดีๆ ราคาน่าสน กระซิบบอกด้วยนะครับ
                              ได้...ครับ...

                              เที่ยงว่าจะออกเลย...จะได้มีเวลาตะเวน...ดู

                              ปกติไปตอนตลาด....วายทุกทีเลย...

                              Comment


                              • เว็บนี้มีครับ
                                http://suvarnabhumiaudio.com/content...44/81/lang,en/

                                Comment

                                Working...
                                X