อ่าน ๆ ดูใน link ที่ 4 ข่างบนแล้ว
ข้อความนี้น่าสนใจครับ
If you have tried it like I said, outside of the case with a known good cpu,
ram, psu and keyboard, and you still can not get into cmos setup, after
clearing the cmos with the method I listed (power cord disconnected. set
jumper. remove battery. let sit for half an hour) then the board is bad.
That is unless you have a jumper set wrong. Set the cpu fsb select to
100/133. Make sure the clear cmos is in the proper position. Be sure to
try with one stick of ram in various slots then the other.
Another thing to try is power on while holding down the insert key. Or how
about downloading the latest bios files put them on a floppy and hold down
Alt-F2 while booting. That process actually takes place at 73h.
โดยเฉพาะย่อหน้าที่ 2 เรื่องการ flash bios โดยไม่ผ่าน OS
Comment