FOXCONN started to develop high-end motherboard since 2007.
They use different code name for each of their High-end products for having a higher brand awareness.
Such like they named their P35 motherboard as MARS and Blackops as their X48. So on and so on.
This time they launch their brand new product of Intel X58, so-called the Highest-end chipset of Intel.
Blood Rage is the code name of Quantum Force series X58 motherboard. It sounds so gamer-centric and full of vigor.
First of all, I like to show the packing outlook to you guys.
Look similar to other brands highest-end motherboard packing.
But I found that Foxconn Quantum Force packing has a lot improvement than before models.
The inside box accessories,
Users manual, installation guide and other relative information.
Here are all the cables, which likes SATA cable with the right angle design.
Some connectors, IO shield, NB additional fan and the water block etc.
BloodRage bundles with the audio daughter card they called Sonar X-Fi audio card.
They provides 2 different ways for NB cooling: the water block and a container for LN2.
Foxconn Quantum Force BloodRage
The main colors of it are Black and Red, this color matching seems to be one of the best looking in market.
I like something clear and stylish.
The lower left of the board :
It features with 4 x PCIe x16 slots
(supports 2 x 16X or 4 x 8X, also supports both ATI Crossfire and Nvidia SLI or PhyX card)
1 x PCIe X1 slot
1 x PCI slot
The lower right part of the board :
It features with :
6 x SATAII (ICH10R, supports RAID 0/1/5/10)
4 x SATAII ( JmicronR322, supportsRAID 0/1/JBOD)
1 x IDE
Dual BIOS, on board power & reset buttom and Debug LED...
The upper right part:
It features:
3 dimms which supports 133/1600/1800, the maximums capacity can be up to 12GB
BloodRage features 3 dimms design whichs different from others in market.
I heard that is a Intels suggestion, all about a good DDR3 performance.
The left hand side is the 24pin power input.
They use different code name for each of their High-end products for having a higher brand awareness.
Such like they named their P35 motherboard as MARS and Blackops as their X48. So on and so on.
This time they launch their brand new product of Intel X58, so-called the Highest-end chipset of Intel.
Blood Rage is the code name of Quantum Force series X58 motherboard. It sounds so gamer-centric and full of vigor.
First of all, I like to show the packing outlook to you guys.
Look similar to other brands highest-end motherboard packing.
But I found that Foxconn Quantum Force packing has a lot improvement than before models.
The inside box accessories,
Users manual, installation guide and other relative information.
Here are all the cables, which likes SATA cable with the right angle design.
Some connectors, IO shield, NB additional fan and the water block etc.
BloodRage bundles with the audio daughter card they called Sonar X-Fi audio card.
They provides 2 different ways for NB cooling: the water block and a container for LN2.
Foxconn Quantum Force BloodRage
The main colors of it are Black and Red, this color matching seems to be one of the best looking in market.
I like something clear and stylish.
The lower left of the board :
It features with 4 x PCIe x16 slots
(supports 2 x 16X or 4 x 8X, also supports both ATI Crossfire and Nvidia SLI or PhyX card)
1 x PCIe X1 slot
1 x PCI slot
The lower right part of the board :
It features with :
6 x SATAII (ICH10R, supports RAID 0/1/5/10)
4 x SATAII ( JmicronR322, supportsRAID 0/1/JBOD)
1 x IDE
Dual BIOS, on board power & reset buttom and Debug LED...
The upper right part:
It features:
3 dimms which supports 133/1600/1800, the maximums capacity can be up to 12GB
BloodRage features 3 dimms design whichs different from others in market.
I heard that is a Intels suggestion, all about a good DDR3 performance.
The left hand side is the 24pin power input.
Comment