ใครพอทราบบ้างไหมครับ คือจะเอาไปเป็นข้อมูลทำงานหน่ะครับ
Announcement
Collapse
No announcement yet.
แผ่น PCB ทำมาจากพลาสติกชนิดไหนครับ
Collapse
X
-
Materials
Conducting layers are typically made of thin copper foil. Insulating layers dielectric are typically laminated together with epoxy resin prepreg. The board is typically coated with a solder mask that is green in color. Other colors that are normally available are blue, and red. There are quite a few different dielectrics that can be chosen to provide different insulating values depending on the requirements of the circuit. Some of these dielectrics are polytetrafluoroethylene, FR-4, FR-1, CEM-1 or CEM-3. Well known prepreg materials used in the PCB industry are FR-2 (Phenolic cotton paper), FR-3 (Cotton paper and epoxy), FR-4 (Woven glass and epoxy), FR-5 (Woven glass and epoxy), FR-6 (Matte glass and polyester), G-10 (Woven glass and epoxy), CEM-1 (Cotton paper and epoxy), CEM-2 (Cotton paper and epoxy), CEM-3 (Woven glass and epoxy), CEM-4 (Woven glass and epoxy), CEM-5 (Woven glass and polyester).
จาก http://en.wikipedia.org/wiki/Printed_circuit_board
Comment
-
-
Originally posted by kk View Postเกี่ยวกับส่วนผสมอ่ะครับ ส่วนผสมของพลาสติกที่นำมาทำแผ่น PCB
PCB ที่นิยมใช้ในปัจจุบัน มี 3 ชนิด
FR-1 Phenolic cotton paper + Copper
FR-4 Woven glass and epoxy + Copper
CEM 1 Cotton paper and epoxy + Copper
รายละเอียดเพิ่มเติมเี่กี่ยวกับ PCB ติดต่อได้ที่
http://www.cipcb.com/
http://www.wara.com/
Comment
Comment