overclockzonefanpage  overclockzoneth  TV  
Results 1 to 20 of 20

Thread: [B][/B] ช่วยดูหน่อยครับว่ามันเป็นที่อะไร

  1. #1

    Join Date
    16 Dec 2007
    Location
    BKK

    Default [B][/B] ช่วยดูหน่อยครับว่ามันเป็นที่อะไร

    เปิดติดนะครับไม่มีเสียง Beep ภาพไม่ขึ้น เป็นเพราะอะไรครับ
    mainboardรุ่น asus p5p800ครับ ช่วยทีครับ
    ลองเอาแรมมาทำความสะอาดแล้วกาดจอก้อแล้วก้อยังไม่หายครับ

  2. #2
    OverclockZone Member one's Avatar
    Join Date
    20 Jul 2007
    Location
    อ.เมือง ระยอง

    Default

    ลองถอดซีพียูออกมาทำความสะอาดด้วย เผื่อจะติด

  3. #3

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ทำยังไงครับ

  4. #4
    OverclockZone Member nonthanan's Avatar
    Join Date
    24 Sep 2007
    Location
    ห้องนอน กรงหมา

    Default

    ปล๊ดที่ขาซ๊อกเก็ตครับ

  5. #5
    OverclockZone Member mza-design's Avatar
    Join Date
    4 Nov 2007
    Location
    Ladprao City

    Default

    การ์ดจอมีปัญหาเปล่าคับ ลองเช็ดสล็อตใส่ดูด้วย

  6. #6

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    กาดจอไช้ได้นะครับเอาไปลองเครื่องอื่นมาไช้ได้ปกติครับ แล้วเวลาเอาcpuมาทำความสะอาดเวลาไส่เข้าไปจำเป็นต้องมีสิลิโคนไหมครับ

  7. #7

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ช่วยทีคราบบบ

  8. #8
    OverclockZone Member zman's Avatar
    Join Date
    18 Sep 2006

    Default

    ถอดออกให้หมด ทำความสะอาด ซ็อกเก็ตให้หมด แล้วประกอบกลับ

  9. #9

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ใช้อะไรทำความสะอาดครับ

  10. #10
    OverclockZone Member zman's Avatar
    Join Date
    18 Sep 2006

    Default

    ถ้าเป็น socket ในบอร์ดก้อแปรงทาสี แปรงสีฟันปัด ถ้าขั้วแรม การ์ดจอ ก้อยางลบดินสอ ลบๆซะให้สะอาดก้อพอแล้ว
    อย่างวันนี้ผมใช้น้ำยาล้างคอนแทค เทราดบอร์ดไปเลยเสร็จปัดด้วยแปรง ตากแดดไว้สักชั่วโมง ก่อนนำมาประกอบก้อเป่าด้วยโบเออร์อีกรอบ จากที่ลงวินโดวส์เป็นสิบๆรอบไม่ผ่าน คราวนี้ครั้งเดียวฉลุยเลย ตอนนี้คืนเจ้าของไปแระั

  11. #11
    OverclockZone Member koptmb's Avatar
    Join Date
    21 May 2007

    Default

    ลองถอดการ์ดจอและแรมดูนะครับ แล้วก็ทําความสะอาด ผมก็เคยเป็นแบบคุณ

  12. #12
    OverclockZone Member ponknook's Avatar
    Join Date
    21 Sep 2006
    Location
    จังหวัดสงขลา

    Default

    แรม ไม่แน่น การ์ดจอหลวม

  13. #13

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ก้อไส่แน่นนะครับ ผมลองเอามาต่อนอกเครื่องแล้วเปิดไมมันเหมือนมีกลิ่นไหม้ไหม้ที่เมนบอดไม่รุ้
    แต่ก้อยังเปิดติดแต่ภาพไม่ขึ้นเหมือนเดิมไฟเขียวโชวที่เมนบอด เหอะ เมื่อไหร่จะได้เล่นเนี่ย

  14. #14
    OverclockZone Member
    Join Date
    17 Sep 2006
    Location
    ห้วยสะท้อน

    Default

    ลองถอดไล่ดูทีละชิ้นหรือยังครับ

  15. #15

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ลองแล้วครับบ

  16. #16
    OverclockZone Member KamuiShirou's Avatar
    Join Date
    11 Jan 2008
    Location
    Bangkok

    Default

    เสียง beep นี่มันน่ากลัวจริงๆ เอามาฝากละกันครับ จะได้เชคได้ ว่ามันเกิดขึ้นจากอะไร

    http://www.technick.net/public/code/...ide_beep_codes

    When you turn the computer on, it performs Power On System Test (POST), during which it checks and initializes the system's internal components.
    If a serious error occurs, the computer does not display a message but emits a series of long and short beeps instead.
    Beeps are your computer's way of letting you know what's going on when the video signal is not working.
    These codes are built in to the BIOS of the PC.
    There is no official standard for these codes due to the many brands of BIOS that are out there.

    To decode the meaning of your computer POST beep codes you must consult the manual of your motherboard.
    If you don't have a motherboard manual or if it's incomplete you must search on the site of your computer manufacturer.
    Another way is take off the computer case and look for BIOS manufacturer (just see if it says "AMI" or "Phoenix" ...).
    For more information about BIOS and how to identify it please check this site: Wim's BIOS Page - Everything you want to know about BIOS.
    Once you have determined your BIOS make, consult the following tables to see what's wrong with your computer.


    [American Megatrends' AMI BIOS][AMI BIOS][AST Research BIOS][AST Enhanced BIOS][AST Phoenix BIOS][WINBIOS][AWARD BIOS][IBM BIOS][MACINTOSH STARTUP TONES][PHOENIX BIOS]

    American Megatrends' AMI BIOS
    Beeps Descriptions
    1 The memory refresh circuitry has failed
    2 Parity errors have been detected in the first 64 KB of memory
    3 A failure has occurred within the first 64 KB or memory
    4 System Timer failure: Timer 1 on the mainboard does not work properly
    5 The CPU has generated an undetectable error
    6 8042 Gate-A20 failure: BIOS cannot switch the CPU into protected mode
    7 The CPU has generated an exception error
    8 The video adapter is missing, or the memory on the adapter has generated a failure
    9 The ROM checksum value does not match the value in BIOS
    10 The shutdown register for CMOS interrupt channel 2 has failed POST; the system board cannot retrieve CMOS contents during POST
    11 Level-2 cache memory has failed the tests, and has been disabled
    2 short POST has failed, caused by a failure of one of the hardware tests
    1 long, 2 short Failure in video system: a checksum error was encountered in video BIOS ROM, or a horizontal retrace failure has been encountered
    1 long, 3 short Failure in video system: the video DAC, the monitor detection procedure or the video RAM has failed
    1 long POST procedures have passed



    AMI BIOS
    The following are AMI BIOS Beep Codes that can occur. However because of the wide variety of different computer manufacturers with this BIOS the beep codes may vary.

    Beep Code Descriptions
    1 short DRAM refresh failure
    2 short Parity circuit failure
    3 short Base 64K RAM failure
    4 short System timer failure
    5 short Process failure
    6 short Keyboard controller Gate A20 error
    7 short Virtual mode exception error
    8 short Display memory Read/Write test failure
    9 short ROM BIOS checksum failure
    10 short CMOS shutdown Read/Write error
    11 short Cache Memory error
    1 long, 3 short Conventional/Extended memory failure
    1 long, 8 short Display/Retrace test failed



    AST Research BIOS
    Long Beep Short Beep Descriptions
    0 1 Low level processor verification test failed (POST 1)
    0 2 Clearing keyboard controller buffers failed (POST 2)
    0 3 Keyboard controller reset failed (POST 3)
    0 4 Low level keyboard controller interface test (POST 4)
    0 5 Reading data from keyboard controller failed (POST 5)
    0 6 System board support chip initialization failed (POST 6)
    0 7 Processor register read/write verify test failed (POST 7)
    0 8 CMOS timer initialization failed (POST 8)
    0 9 ROM BIOS checksum test failed (POST 9)
    0 10 Initialize primary video (POST 10)
    0 11 8254 timer channel 0 test failed (POST 11)
    0 12 8254 timer channel 1 test failed (POST 12)
    0 13 8254 timer channel 2 test failed (POST 13)
    0 14 CMOS power-on and time test failed (POST 14)
    0 15 CMOS shutdown byte test failed (POST 15)
    1 0 DMA channel 0 test failed (POST 16)
    1 1 DMA channel 1 test failed (POST 17)
    1 2 DMA page register test failed (POST 18)
    1 3 Keyboard controller interface test failed (POST 19)
    1 4 Memory refresh toggle test failed (POST 20)
    1 5 First 64 KB memory test failed (POST 21)
    1 6 Setup interrupt vector table failed (POST 22)
    1 7 Video initialization failed (POST 23)
    1 8 Video memory test failed (POST 24)



    AST Enhanced BIOS
    Short Beep Long Beep Short Beep Descriptions
    3 1 - Flash loader failure
    3 2 - Failure in system board component
    3 3 - Failure in system board component
    3 4 - Memory failure
    3 5 - Video failure
    0 6 - Flash BIOS update error
    - 2 x AST low level diagnostics



    AST Phoenix BIOS
    Beeps Descriptions
    1-1-3 CMOS read/write failure
    1-1-4 ROM BIOS checksum failure
    1-2-1 Programmable interval timer failure
    1-2-2 DMA initialization failure
    1-2-3 DMA page register read/write failure
    1-3-1 RAM refresh verification failure
    1-3-3 First 64 KB RAM chip or data or data line failure
    1-3-4 First 64 KB RAM odd/even logic failure
    1-4-1 First 64 KB RAM address line failure
    1-4-2 First 64 KB RAM parity failure
    2-1-1 First 64 KB RAM failure bit 0
    2-1-2 First 64 KB RAM failure bit 1
    2-1-3 First 64 KB RAM failure bit 2
    2-1-4 First 64 KB RAM failure bit 3
    2-2-1 First 64 KB RAM failure bit 4
    2-2-2 First 64 KB RAM failure bit 5
    2-2-3 First 64 KB RAM failure bit 6
    2-2-4 First 64 KB RAM failure bit 7
    2-3-1 First 64 KB RAM failure bit 8
    2-3-2 First 64 KB RAM failure bit 9
    2-3-3 First 64 KB RAM failure bit A
    2-3-4 First 64 KB RAM failure bit B
    2-4-1 First 64 KB RAM failure bit C
    2-4-2 First 64 KB RAM failure bit D
    2-4-3 First 64 KB RAM failure bit E
    2-4-4 First 64 KB RAM failure bit F
    3-1-1 Slave DMA register failure
    3-1-2 Master DMA register failure
    3-1-3 Slave interrupt mask register failure
    3-1-4 Slave interrupt mask failure
    3-2-4 Keyboard controller test failure
    3-3-4 Screen memory test failure
    3-4-1 Screen initialization failure
    3-4-2 Screen retrace test failure
    3-4-3 Failure searching for video ROM
    4-2-1 No timer tick
    4-2-3 Gate-A20 failure
    4-2-4 Unexpected interrupt in protected mode



    WINBIOS
    Beeps Error Message Description Resolution
    1 Refresh Failure The memory refresh circuitry is faulty. Reseat the memory SIMMs. If the system still beeps, replace the memory.
    2 Parity Error Parity error in the base memory (the first 64 KB block) of memory. Reseat the memory SIMMs. If the system still beeps, replace the memory.
    3 Base 64 KB Memory Failure Memory failure in first 64 KB. Reseat the memory SIMMs. If the system still beeps, replace the memory.
    4 Timer Not Operational A memory failure in the first 64 KB of memory, or Timer 1 is not functioning. The motherboard must be replaced.
    5 Processor error 8042 - Gate A20 Failure The CPU generated an error. The motherboard must be replaced.
    6 8042 - Gate A20 Failure Processor Exception Interrupt Error Cannot switch to protected mode. Try a different keyboard, or replace the keyboard fuse, if the keyboard has one.
    7 Processor Exception Interrupt Error The CPU on the CPU Card generated an exception interrupt. The motherboard must be replaced.
    8 Display Memory Read/Write Error The system video adapter is either missing or its memory is faulty. This is not a fatal error. There is a memory error on the video adapter. Replace the video adapter, or the RAM on the video adapter.
    9 ROM Checksum Error The ROM checksum value does not match the value encoded in WINBIOS. The BIOS ROM chip is bad. The system probably needs a new BIOS ROM chip.
    10 CMOS Shutdown Register Read/Write Error The shutdown register for CMOS RAM has failed. The motherboard must be replaced.
    11 Cache memory bad - do not enable cache The cache memory test failed. Cache memory is disabled. Do not press Ctrl/Alt/Shift <+> to enable cache memory. The motherboard must be replaced.



    AWARD BIOS
    The following are Award BIOS Beep Codes that can occur. However because of the wide variety of different computer manufacturers with this BIOS the beep codes may vary.

    Beep Code Descriptions
    1 long, 2 short Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information
    Any other beep(s) >RAM problem.



    If any other correctable hardware issues the BIOS will display a message.

    IBM BIOS
    The following are IBM BIOS Beep Codes that can occur. However because of the wide variety of models shipping with this BIOS the beep codes may vary.

    Beep Code Descriptions
    No Beeps No Power, Loose Card, or Short.
    1 Short Beep Normal POST, computer is ok.
    2 Short Beep POST error, review screen for error code.
    Continuous Beep No Power, Loose Card, or Short.
    Repeating Short Beep No Power, Loose Card, or Short.
    One Long and one Short Beep Motherboard issue.
    One Long and Two short Beeps Video (Mono/CGA Display Circuitry) issue.
    One Long and Three Short Beeps. Video (EGA) Display Circuitry.
    Three Long Beeps Keyboard / Keyboard card error.
    One Beep, Blank or Incorrect Display Video Display Circuitry.



    MACINTOSH STARTUP TONES
    TONES ERROR
    Error Tone. (two sets of different tones) Problem with logic board or SCSI bus.
    Startup tone, drive spins, no video Problem with video controller.
    Powers on, no tone. Logic board problem.
    High Tone, four higher tones. Problem with SIMM.



    PHOENIX BIOS
    PHOENIX BIOS Q3.07 OR 4.X

    Beep Code Descriptions / What to Check
    1-1-1-3 Verify Real Mode.
    1-1-2-1 Get CPU type.
    1-1-2-3 Initialize system hardware.
    1-1-3-1 Initialize chipset registers with initial POST values.
    1-1-3-2 Set in POST flag.
    1-1-3-3 Initialize CPU registers.
    1-1-4-1 Initialize cache to initial POST values.
    1-1-4-3 Initialize I/O.
    1-2-1-1 Initialize Power Management.
    1-2-1-2 Load alternate registers with initial POST values.
    1-2-1-3 Jump to UserPatch0.
    1-2-2-1 Initialize keyboard controller.
    1-2-2-3 BIOS ROM checksum.
    1-2-3-1 8254 timer initialization.
    1-2-3-3 8237 DMA controller initialization.
    1-2-4-1 Reset Programmable Interrupt Controller.
    1-3-1-1 Test DRAM refresh.
    1-3-1-3 Test 8742 Keyboard Controller.
    1-3-2-1 Set ES segment to register to 4 GB.
    1-3-3-1 28 Autosize DRAM.
    1-3-3-3 Clear 512K base RAM.
    1-3-4-1 Test 512 base address lines.
    1-3-4-3 Test 512K base memory.
    1-4-1-3 Test CPU bus-clock frequency.
    1-4-2-4 Reinitialize the chipset.
    1-4-3-1 Shadow system BIOS ROM.
    1-4-3-2 Reinitialize the cache.
    1-4-3-3 Autosize cache.
    1-4-4-1 Configure advanced chipset registers.
    1-4-4-2 Load alternate registers with CMOS values.
    2-1-1-1 Set Initial CPU speed.
    2-1-1-3 Initialize interrupt vectors.
    2-1-2-1 Initialize BIOS interrupts.
    2-1-2-3 Check ROM copyright notice.
    2-1-2-4 Initialize manager for PCI Options ROMs.
    2-1-3-1 Check video configuration against CMOS.
    2-1-3-2 Initialize PCI bus and devices.
    2-1-3-3 Initialize all video adapters in system.
    2-1-4-1 Shadow video BIOS ROM.
    2-1-4-3 Display copyright notice.
    2-2-1-1 Display CPU type and speed.
    2-2-1-3 Test keyboard.
    2-2-2-1 Set key click if enabled.
    2-2-2-3 56 Enable keyboard.
    2-2-3-1 Test for unexpected interrupts.
    2-2-3-3 Display prompt "Press F2 to enter SETUP".
    2-2-4-1 Test RAM between 512 and 640k.
    2-3-1-1 Test expanded memory.
    2-3-1-3 Test extended memory address lines.
    2-3-2-1 Jump to UserPatch1.
    2-3-2-3 Configure advanced cache registers.
    2-3-3-1 Enable external and CPU caches.
    2-3-3-3 Display external cache size.
    2-3-4-1 Display shadow message.
    2-3-4-3 Display non-disposable segments.
    2-4-1-1 Display error messages.
    2-4-1-3 Check for configuration errors.
    2-4-2-1 Test real-time clock.
    2-4-2-3 Check for keyboard errors
    2-4-4-1 Set up hardware interrupts vectors.
    2-4-4-3 Test coprocessor if present.
    3-1-1-1 Disable onboard I/O ports.
    3-1-1-3 Detect and install external RS232 ports.
    3-1-2-1 Detect and install external parallel ports.
    3-1-2-3 Re-initialize onboard I/O ports.
    3-1-3-1 Initialize BIOS Data Area.
    3-1-3-3 Initialize Extended BIOS Data Area.
    3-1-4-1 Initialize floppy controller.
    3-2-1-1 Initialize hard-disk controller.
    3-2-1-2 Initialize local-bus hard-disk controller.
    3-2-1-3 Jump to UserPatch2.
    3-2-2-1 Disable A20 address line.
    3-2-2-3 Clear huge ES segment register.
    3-2-3-1 Search for option ROMs.
    3-2-3-3 Shadow option ROMs.
    3-2-4-1 Set up Power Management.
    3-2-4-3 Enable hardware interrupts.
    3-3-1-1 Set time of day.
    3-3-1-3 Check key lock.
    3-3-3-1 Erase F2 prompt.
    3-3-3-3 Scan for F2 key stroke.
    3-3-4-1 Enter SETUP.
    3-3-4-3 Clear in-POST flag.
    3-4-1-1 Check for errors
    3-4-1-3 POST done--prepare to boot operating system.
    3-4-2-1 One beep.
    3-4-2-3 Check password (optional).
    3-4-3-1 Clear global descriptor table.
    3-4-4-1 Clear parity checkers.
    3-4-4-3 Clear screen (optional).
    3-4-4-4 Check virus and backup reminders.
    4-1-1-1 Try to boot with INT 19.
    4-2-1-1 Interrupt handler error.
    4-2-1-3 Unknown interrupt error.
    4-2-2-1 Pending interrupt error.
    4-2-2-3 Initialize option ROM error.
    4-2-3-1 Shutdown error.
    4-2-3-3 Extended Block Move.
    4-2-4-1 Shutdown 10 error.
    4-3-1-3 Initialize the chipset.
    4-3-1-4 Initialize refresh counter.
    4-3-2-1 Check for Forced Flash.
    4-3-2-2 Check HW status of ROM.
    4-3-2-3 BIOS ROM is OK.
    4-3-2-4 Do a complete RAM test.
    4-3-3-1 Do OEM initialization.
    4-3-3-2 Initialize interrupt controller.
    4-3-3-3 Read in bootstrap code.
    4-3-3-4 Initialize all vectors.
    4-3-4-1 Boot the Flash program.
    4-3-4-2 Initialize the boot device.
    4-3-4-3 Boot code was read OK.

    ขอให้โชคดีครับ

  17. #17

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ถ้ามันbeepก้อดีสิครับนี่มันเล่นไม่มีเสียงไรเลย

  18. #18
    OverclockZone Member
    Join Date
    3 Apr 2007

    Default

    ก่อนหน้าที่จะเกิดปัญหาได้เพิ่ม hardware เข้าไปหรือเปล่า และลองเช็ค power supply จ่ายไฟพอหรือไม่

  19. #19

    Join Date
    16 Dec 2007
    Location
    BKK

    Default

    ไม่นิครับแค่เอาออกมาทำความสะอาดพอกลับเข้าไปมันก้อไช้ไม่ได้แล้ว แล้ววิธีเช็คว่าไฟพอไม่พอทำยังไงครับ

  20. #20
    OverclockZone Member
    Join Date
    30 Apr 2007

    Default

    อาการเดียวกะผมเลยฮะ
    Last edited by MASTERCOM; 9 Mar 2008 at 11:02:31.


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •