overclockzonefanpage  overclockzoneth  TV  
Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: RivaTuner 2.11 เวอร์ชั่นล่าสุด มีอะไรใหม่มาดูกันจ้า!!

  1. #1
    OverclockZone Member meen182's Avatar
    Join Date
    15 Sep 2007

    Default RivaTuner 2.11 เวอร์ชั่นล่าสุด มีอะไรใหม่มาดูกันจ้า!!

    แว๊ก!! อื้อเลยยย อ่านไม่ออก -*-
    Revision update - Version 2.11:

    Minor bugfixes:

    * Low-level hardware access interfaces are now re-initialized properly before restarting the plugins when changing display adapter selection in the main tab.

    What's new:

    * Updated databases for Detonator and ForceWare drivers. Added database for ForceWare 177.98.
    * Added experimental AMD RV710 and RV730 graphics processors families support. Thanks to Andrey Vorobiev for testing RivaTuner with AMD RADEON HD 4670.
    * Display adapter enumeration routine has been modified to provide proper fan control on AMD RADEON HD 4870 X2 series. New enumeration routine also gives additional advantages to the rest systems:
    o Now RivaTuner is able to detect physical display adapters attached to logical Windows display devices as well as unattached physical display adapters. Low-level access to unattached display adapters gives you the following abilities:
    + Ability to use RivaTuner for low-level diagnostics, hardware monitoring and fan control even when Windows is booted in VGA mode (e.g. in safe mode or with no display driver installed).
    + Ability to use RivaTuner for low-level diagnostics, hardware monitoring and fan control for slave display devices in SLI / Crossfire mode invisible for OS.
    o Attached display adapters detection time has been reduced due to optimized PCI bus scanning routine. Furthermore, both attached and unattached display devices detection are optional and can be forcibly disabled via DetectAttachedDevices and DetectUnattachedDevices registry entries for startup time optimization.
    o Improved secondary display adapter heads enumeration. Now RivaTuner mirrors primary head specific settings (e.g. overclocking and fan control) into the secondaty head UI.
    o Optimized startup time due to improved object dynamic/static casting in hardware abstraction layer.
    * Added experimental overclocking support for the secondary display adapters in Crossfire systems (only for Windows Vista).
    * Added experimental low-level fan control and overclocking settings cloning modes. When cloning mode is enabled RivaTuner clones and automatically applies the same low-level fan control or overclocking settings to all identical devices (i.e. the same display adapter models, different brands are allowed) installed in the system. Please take a note that currently these modes are available to power users only and can be enabled via EnableFanControlCloning and EnableClockControlCloning registry entries.
    * Updated exceptions list for bundled D3DOverrider utility.
    * Improved hardware monitoring module:
    o Improved ADT7473.dll plugin:
    + Added Vcc and Vccp voltages monitoring support. Now The the plugin can monitor state of +3.3V supply voltage of ADT7473 chip (Vcc) and additinal optional voltage input (Vccp), which can be used to monitor different display adapter related voltages depending on the PCB design (e.g. memory voltage on RADEON HD 4870 X2 series display adapters).
    + Improved fan speed monitoring for fans with non-standard pulses per revolution count on tachometer output. Now the plugin no longer uses hardcoded calculations for standard fans with 2 pulses per revolution and can provide correct RPM monitoring for such systems (e.g. fans with 4 pulses per revolution on NVIDIA GeForce GTX 260 / 280 series).
    o Improved VT1103.dll plugin:
    + Now the plugin is able to monitor independent temperatures of VT1105/VT1165 voltage regulator phases (slave chips).
    o Improved temperature monitoring for RV710 / RV730 / RV770 graphics processors family. Now RivaTuner is able to monitor independent temperatures of display controller, memory controller and shader core on RV7xx graphics processors. Please take a note that unlike many other diagnostic tools reading these temperatures via GPU's internal sensor switching and calibration logic, RivaTuner reads these temperatures via direct access to thermal sensor's ADC outputs and calibrates ADC readings at software level. Such approach drastically reduces CPU load and doesn't have side effects like fan speed fluctuations caused by frequent sensor switching, however it is in experimental stage yet so please contact me if additional core temperatures reported by RivaTuner and other software like GPU-Z or Everest seriously differ on your system. Please take a note that traditional sensor switching based access to these temperature sensors can be also enabled for debugging and performance comparision via ATIThermalSensorAccessModeR7xx registry entry.
    o Optimized GPU usage monitoring for RV710 / RV730 / RV770 graphics processors family. Now RivaTuner is no longer waiting for response from on-die PowerPlay microcontroller if GPU usage is not sampled yet and returns the previous cached value instead.
    o Now hardware monitoring plugin activation wizard module enables ADT7473 plugin by default on AMD READEON HD 4870 X2 series display adapters.
    * Improved /SD and /SELECTDEVICE command line switches handler. RivaTuner's GUI is no longer activated and displayed when current display device selection is changed via these command line switches. This improvement allows you to switch target display device in multimonitor or multi-GPU SLI/Crossfire systems via hotkeys without leaving 3D application.
    * Added I2C bus disconnection feature for ATI RV6xx/RV7xx I2C controllers. Now RivaTuner is able to mark I2C bus as unused and exclude it from further detection when I2C controller is not responding to the transactions through this bus during specified timeout. Bus disconnection feature drastically reduces I2C devices scanning time on some systems with missing I2C buses (e.g. on the secondary chip of AMD RADEON HD 4870 X2 having no physical connection to I2C bus). Please take a not that I2C bus disconnection can be disabled via AllowI2CBusDisconnection registry entry if necessary.
    * Default timeout for ATI I2C transactions has been reduced from 2 seconds to 0.5 second. Now power users may adjust the timeout using ATII2CTimeout registry entry.
    * Improved duty cycle generation accuracy for all types of on-die and external fan controllers due to floating point calculation usage.

    Download

  2. #2
    OverclockZone Member charif's Avatar
    Join Date
    10 Nov 2007
    Location
    central พระราม3 นิ

    Default

    THK คับ ^^

  3. #3
    OverclockZone Member dears's Avatar
    Join Date
    6 Nov 2006
    Location
    Royal Thai Army

    Default

    ยาวเกิน แปลไม่ออก โหลดเลยดีกว่า .... หุหุ

    ขอบคุณงับ

  4. #4
    OverclockZone Member ZatanBoy's Avatar
    Join Date
    6 Jun 2007

    Default

    เหอๆ ยาวจัด ขี้เกียจแปล ใครว่างจัด แปลแล้วช่วยโพสทีเน้อ

    ขอบคุณงับ

  5. #5
    OverclockZone Member winit_a's Avatar
    Join Date
    13 May 2007
    Location
    พระนครเหนือ

    Default

    ขอบคุณคับ

  6. #6
    OverclockZone Member YaKuZiA's Avatar
    Join Date
    16 Sep 2008
    Location
    สมุทรปราการ/พระประแดง

    Default

    อ่า ม่า เอาะ

  7. #7
    OverclockZone Member penguinbenz's Avatar
    Join Date
    26 Dec 2006
    Location
    ถนนจอมทอง

    Default

    ขอบคุณครับ

  8. #8
    OverclockZone Member คุณพระช่วย's Avatar
    Join Date
    24 Jun 2008

    Default

    ขอบคุณครับ ว่าแต่เอามาจากเวป guru3d หรือเปล่าครับ ยังให้ให้เครดิตเจ้าของด้วยก็ดี

  9. #9
    OverclockZone Member meekung123's Avatar
    Join Date
    7 May 2007
    Location
    แถวๆสะพานปิ่นเกล้า

    Default

    ขอบคุณมากท่าน

  10. #10
    OverclockZone Member automation's Avatar
    Join Date
    15 May 2007
    Location
    ซอยเสนา ม.เกษตร พหลโยธิน ซ.30 เมเจอร์รัชโยธิน เซ็นทรัล-ลาดพร้าว ลาดพร้าว18

    Default

    อยากๆด้ ATItool ที่ลาก 4850 ได้ อะๆๆ

  11. #11
    OverclockZone Member Alatal2iel's Avatar
    Join Date
    30 Mar 2007

    Default

    ขอบคุณมากครับ

  12. #12
    OverclockZone Member ISaWaRa's Avatar
    Join Date
    17 Sep 2008

    Default

    กรำ...อ่านไม่ออก

    เอาเป็นว่าเดี๋ยวไปลองเลยก็แล้วกัน

  13. #13
    OverclockZone Member
    Join Date
    17 Aug 2008

    Default

    ขอบคุณมากครับ

  14. #14
    OverclockZone Member junely's Avatar
    Join Date
    5 Mar 2008

    Default

    น่าจะแปลให้ด้วยนะท่าน พอดีภาษาไม่แข็งแรง

  15. #15
    OverclockZone Member JINDASAMUD's Avatar
    Join Date
    13 May 2007
    Location
    อ.สะเดา จ.สงขลา

    Default

    ขอบคุณ

  16. #16
    OverclockZone Member pik_1_2's Avatar
    Join Date
    30 May 2007
    Location
    เมือง 2 ทะเล กับ กรุงเทพฯ

    Default

    ขอบคุณครับ

  17. #17
    OverclockZone Member thepparit's Avatar
    Join Date
    14 Dec 2007

    Default

    อืม..เอ่อ

    หุหุ ห่ะห่ะ อิอิ อุอุ กั่กกั่ก คริคริ ป๊าบป๊าป คิโมจิ๊ คิโมจิ๊ ซึโก๊ย

  18. #18
    OverclockZone Member YOYO-AMD's Avatar
    Join Date
    11 Sep 2007
    Location
    อุดมสุข-บางนา ได้หมด

    Default

    อยากทราบว่าโปรแกรมนี้เอาไว้ทำไรครับ ต้องมีทุกเครื่องไหมที่ใช้ ATI ขอบคุณครับ

  19. #19
    OverclockZone Member thepparit's Avatar
    Join Date
    14 Dec 2007

    Default

    Quote Originally Posted by YOYO-AMD View Post
    อยากทราบว่าโปรแกรมนี้เอาไว้ทำไรครับ ต้องมีทุกเครื่องไหมที่ใช้ ATI ขอบคุณครับ

    ไม่จำเป็นนะครับ สำหรับคนที่ต้องการปรับแต่งค่าต่างๆเพิ่มเติม
    Last edited by thepparit; 18 Sep 2008 at 11:37:12.

  20. #20
    OverclockZone Member YOYO-AMD's Avatar
    Join Date
    11 Sep 2007
    Location
    อุดมสุข-บางนา ได้หมด

    Default

    Quote Originally Posted by thepparit View Post
    ไม่จำเป็นนะครับ สำหรับคนที่ต้องการปรับแต่งค่าต่างๆเพิ่มเติม
    ขอบคุณครับ ตอนนี้เพิ่งได้ 3650 มาใหม่แทนตัวในลายเซ็นต์ ปวดหัวเล้ย มีปัญหานิดหน่อย

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •