overclockzonefanpage  overclockzoneth  TV  
Results 1 to 5 of 5

Thread: วิธี overclock asus striker II formula

  1. #1
    OverclockZone Member 1623's Avatar
    Join Date
    9 Nov 2008

    Default วิธี overclock asus striker II formula

    ทำยังไงครับ ผมลองใช้ tweater ที่อัสสุซให้มา มันไม่แรงครับ อยากปรับแบบ manual ครับ
    แล้วถ้าปรับมาก ๆ เมนบอร์ดจะพังป่าวครับ

  2. #2
    OverclockZone Member อิมพีเรียล's Avatar
    Join Date
    29 Sep 2006
    Location
    พิษณุโลก

    Default

    บอร์ดระดับนี้เค้าทำเพื่อการนี้ครับ ไม่ต้องกลัว

  3. #3
    OverclockZone Member 1623's Avatar
    Join Date
    9 Nov 2008

    Default

    ขอบคุณครับ นึกว่าไม่มึคนตอบซะแล้ว

  4. #4
    OverclockZone Member panuza's Avatar
    Join Date
    1 Nov 2006
    Location
    รามอินทรา กท2,พุทธมณทน สาย2

    Default

    เปนบอด ASUS Striker II Extreme หลักการ oc ไม่แต่กันมากนัก

    Required System Specifications
    PSU ( Power Supply Unit ) = Corsair HX620 ( 620W )
    CPU = Intel Core 2 Duo E8400
    RAM = CellShock DDR3-1800 2GB Kit ( CS3222580 ) [ Micron D9GTR chips ]
    HDD ( the one where you have your windows installation on ) = Samsung HD501LJ ( 500GB, SATA II )
    VGA1 = Asus GeForce 9800GTX 512MB
    VGA2 ( if you have ) = Asus GeForce 9800GTX 512MB
    VGA3 ( if you have ) =
    SPU ( Sound Card ) = Creative SoundBlaster X-Fi Fatal1ty FPS
    NorthBridge Cooling = Stock cooler with a fan above it blowing towards the NB
    SouthBridge Cooling = Stock cooler with a fan above it blowing towards the SB
    CPU Cooling = ThermalRight Ultra-120 Extreme
    RAM Cooling = Corsair Dominator AirFlow
    nFORCE Chipset Drivers Version = nVIDIA nFORCE Drivers v9.64
    ForceWare/GeForce Drivers Version = nVIDIA ForceWare v173.67
    Sound Card Drivers Version = Creative SoundBlaster X-Fi Drivers WebUpdate 4 v [ I'm bored enough to check the files now ]
    BIOS version 0801 REQUIRED

    BIOS Settings
    Extreme Tweaker
    CPU Level Up = Auto
    Memory Level Up = Auto
    AI Overclock Tuner = Manual
    CPU Multiplier = 9
    FSB - Memory Clock Mode = Linked
    FSB - Memory Ratio = Synch
    FSB (QDR) MHz = 1600
    MEM (DDR) MHz = 1600
    LDT Frequency = 5x
    PCIE Bus Slot 1 & 2 MHz = 100
    PCIE Bus Slot 3 MHz = 100
    SPP<->MCP Ref Clock, MHz = 200.0MHz
    SLI-Ready Memory = Disabled

    Memory Timing Setting
    P1 = Enabled
    P2 = Enabled
    tCL ( CAS Latency ) = 7
    tRCD = 7
    tRP = 6
    tRAS = 21
    Command Per Clock (CMD) = 1T
    tRRD = 7
    tRC = 33
    tWR = 10
    tWTR = 25
    tFAW = 33
    tRD = 11
    tRTP = 7
    tRFC = 60
    tREF = 7.8us

    Over Voltage
    CPU Voltage = 1.2375V
    Loadline Calibration = Enabled
    CPU PLL Voltage = 1.60V
    CPU VTT Voltage = 1.30V
    Memory Voltage = 1.70V
    NB Core Voltage = 1.66V
    SB Core Voltage = 1.65V
    CPU GTL REF0 Ratio = +14mV
    CPU GTL REF1 Ratio = +26mV
    CPU GTL REF2 Ratio = +26mV
    CPU GTL REF3 Ratio = +14mV
    NB GTL REF Ratio = +30mV
    DDR3 CHA1 Ref Volt = DDR3_REF
    DDR3 CHB1 Ref Volt = DDR3_REF
    DDR3 CHA2 Ref Volt = DDR3_REF
    DDR3 CHB2 Ref Volt = DDR3_REF

    CPU Configuration
    CPU Internal Thermal Control = Disabled
    Limit CPUID MaxVal = Disabled
    Enhanced C1 (C1E) = Disabled
    Execute Disable Bit = Disabled
    Virtualization Technology = Disabled
    Enhanced Intel SpeedStep(tm) Tech. = Disabled
    CPU Core 2 = Enabled
    CPU Core 3 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled
    CPU Core 4 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled

    Spread Spectrum Control
    CPU Spread Spectrum = Disabled
    PCIE Spread Spectrum = Disabled
    MCP PCIE Spread Spectrum = Disabled
    SATA Spread Spectrum = Disabled
    LDT Spread Spectrum = Disabled

  5. #5
    OverclockZone Member HERO-NUT's Avatar
    Join Date
    5 Oct 2008
    Location
    SINGBURI , Chachoengsao

    Default

    ผมกะลังจะสอย Rampage ll


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •