overclockzonefanpage  overclockzoneth  TV  
Results 1 to 4 of 4
  1. #1
    OverclockZone Member ofonzar's Avatar
    Join Date
    22 Sep 2008
    Location
    Latkrabang

    Default อยากทราบวิธีFlash Bios ใน dos notebook CQ45-107tx

    พอดีผมได้ส่งไฟล์ bios เดิม ไปทำการดัดแปลง ที่เว็บชีวิตดิจิตอลของฉัน อ่ะครับ
    แต่พอได้ไฟล์มาแล้ว ไม่ทราบวิธีการ flash ครับ ใน dos ว่าต้องทำอย่างไรครับ เพราะ ว่าตอนแรกผมลองรันมัน บน window หลังจากนั้นคอมก็จอดำไปเลยครับ ก็เลยต้อง Recovery กลับมา เลยอยากทราบวิธีที่แน่นอนอ่ะครับ ไม่อยากจอดำอีก ผมใช้ bios type : insyde
    notebook รุ่น cq45-107tx

  2. #2
    OverclockZone Member renaw's Avatar
    Join Date
    30 Nov 2006

    Default

    Here are the steps of creating a BOOTABLE USB Flash Drive....just remember this will only work if your motherboard supports bootable USB Flash Drives. Check the BIOS Setup to see if the BOOT Sequence will support USB Flash Drive support.

    1. Download this file from the following link: http://www.box.net/shared/qo40k21nmy

    2. Unrar the file and find the folder HP Disk Storage Format Tool. Install the program.

    3. After installing program find the folder called WinImage Winrar File. Unrar the 3 files into this same foder of which you found it.

    4. Insert USB Flash Drive into a USB Port.

    5. Right click on HP Disk Storage Format Tool on your desktop and RUN AS ADMINISTRATOR.

    6. In the HP Disk Storage Tool, make sure the name of the USB Flash Drive is in the DEVICE window.

    7. In the HP Disk Storage Tool, choose FAT32 for the file system.

    8. In the HP Disk Storage Tool, make sure a Volume Label Appears - if it does not appear, then it is not recognizing your USB flash Drive.

    8. In the HP Disk Storage Tool, choose CREATE A DOS START UP DISK. Under USING DOS SYSTEM FILES LOCATED AT, navigate to the folder of where you unrared the 3 WinImage Files as explained in step 3 above and open the folder.

    9. Click Start and it will turn the USB Flash Drive into a Bootable USB Flash Drive. Leave your USB Flash Drive in the USB Port - DO NOT REMOVE THE FLASH DRIVE AT THIS POINT.

    10. Now, since I do not know what you have for a flash utility from your motherboard website, I can only guess. But if you have a DOS flash Utility, the Modified Bios File and a Autoexc.bat file (this may be missing and is not necessary for all bios), then highlight all 2 - 3 files and right click on it and choose WINRAR - ADD TO ARCHIVE. Give the archive a name and then save the winrar file.

    11. Next open the SAVED winrar file with the 2 - 3 files that you rared. Open by right clicking on it and then choose WINRAR - EXTRACT FILES ( Do not choose EXTRACT HERE).

    12. When the EXTRACT FILES property window opens, click on the Bootable USB drive in the TREE VIEW of this winrar window to highlight it. Now click OK button and these will extract the 2 - 3 files to your bootable USB Drive. DO NOT COPY AND PASTE these 2 - 3 files to your Bootable USB Flash Drive....these files must be extracted to the bootable USB Flash Drive through an extractor such as winrar rather than copied and pasted. onto the bootable USB Flash Drive.

    13. Now you are ready to flash your bios with the modified bios file on your bootable USB Flash Drive.

  3. #3
    OverclockZone Member mengchanchai's Avatar
    Join Date
    4 Aug 2007
    Location
    Rayong

    Default

    Quote Originally Posted by renaw View Post
    Here are the steps of creating a BOOTABLE USB Flash Drive....just remember this will only work if your motherboard supports bootable USB Flash Drives. Check the BIOS Setup to see if the BOOT Sequence will support USB Flash Drive support.

    1. Download this file from the following link: http://www.box.net/shared/qo40k21nmy

    2. Unrar the file and find the folder HP Disk Storage Format Tool. Install the program.

    3. After installing program find the folder called WinImage Winrar File. Unrar the 3 files into this same foder of which you found it.

    4. Insert USB Flash Drive into a USB Port.

    5. Right click on HP Disk Storage Format Tool on your desktop and RUN AS ADMINISTRATOR.

    6. In the HP Disk Storage Tool, make sure the name of the USB Flash Drive is in the DEVICE window.

    7. In the HP Disk Storage Tool, choose FAT32 for the file system.

    8. In the HP Disk Storage Tool, make sure a Volume Label Appears - if it does not appear, then it is not recognizing your USB flash Drive.

    8. In the HP Disk Storage Tool, choose CREATE A DOS START UP DISK. Under USING DOS SYSTEM FILES LOCATED AT, navigate to the folder of where you unrared the 3 WinImage Files as explained in step 3 above and open the folder.

    9. Click Start and it will turn the USB Flash Drive into a Bootable USB Flash Drive. Leave your USB Flash Drive in the USB Port - DO NOT REMOVE THE FLASH DRIVE AT THIS POINT.

    10. Now, since I do not know what you have for a flash utility from your motherboard website, I can only guess. But if you have a DOS flash Utility, the Modified Bios File and a Autoexc.bat file (this may be missing and is not necessary for all bios), then highlight all 2 - 3 files and right click on it and choose WINRAR - ADD TO ARCHIVE. Give the archive a name and then save the winrar file.

    11. Next open the SAVED winrar file with the 2 - 3 files that you rared. Open by right clicking on it and then choose WINRAR - EXTRACT FILES ( Do not choose EXTRACT HERE).

    12. When the EXTRACT FILES property window opens, click on the Bootable USB drive in the TREE VIEW of this winrar window to highlight it. Now click OK button and these will extract the 2 - 3 files to your bootable USB Drive. DO NOT COPY AND PASTE these 2 - 3 files to your Bootable USB Flash Drive....these files must be extracted to the bootable USB Flash Drive through an extractor such as winrar rather than copied and pasted. onto the bootable USB Flash Drive.

    13. Now you are ready to flash your bios with the modified bios file on your bootable USB Flash Drive.
    เอ..................จะบอกวิธี flash bios หรือ วิธีทำ bootable usb flash drive กันแน่ครับ?

  4. #4
    OverclockZone Member kanao's Avatar
    Join Date
    29 Oct 2006

    Default

    www.moolandxp.com
    ครับลองไปศึกษาดู


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •